DMG32240C028_03WTR
- 2.8″
- 240 × 320
- Resistive

DWIN 2.8″ Smart TFT LCD Display (Capacitive Touch)

We designed and built this HMI demo on the DMG32240C028_03WTC: 320 × 240. It runs on our DWIN demo box, and we can build screens like this for your product.
| Screen size | 2.8 inch |
|---|---|
| Resolution | 240 × 320 pixels |
| Colours | 262K (18-bit) |
| Panel type | TN, TFT LCD |
| Active area | 58.30 mm (W) × 44.20 mm (H) |
| Brightness | 250 nit |
| Viewing angle (L / R / U / D) | 70° / 70° / 50° / 70° |
| Backlight life | > 20,000 hours (LED) |
| Touch type | Capacitive |
|---|---|
| Construction | G+G structure, tempered glass, surface hardness ≥ 6H, light transmittance > 85 % |
| Controller | DWIN T5L ASIC |
|---|---|
| Flash memory | 16 MB NOR flash (over 100,000 rewrite cycles) |
| SD card | Supported (FAT32), 4 Mb/s download |
| Buzzer | 3 V passive buzzer |
| Connector | 10-pin, 1.0 mm latching socket |
|---|---|
| Serial interface | UART2 / UART4, TTL/CMOS |
| Baud rate | 3,150 – 3,225,600 bps (typical 115,200 bps) |
| Operating voltage | 4.5 – 5.5 V (typical 5 V) |
|---|---|
| Operating current | 130 mA max |
| Power consumption | < 5 W |
| Recommended supply | 5 V, 1 A DC |
| Operating temperature | −20 °C to 70 °C |
|---|---|
| Storage temperature | −30 °C to 80 °C |
| Humidity | 10 – 90 % RH |
| Software / system | DGUS II / TA (instruction set) |
|---|
Specifications are from the DWIN datasheet and may change. Please confirm with us before ordering.
Connect directly with our hardware, firmware, and DWIN display engineers in Ahmedabad for technical consultation and transparent pricing.