Get a quote

DMG32240C028_03WTR 2.8″ Smart HMI

DMG32240C028_03WTR
Compact 2.8″ / 3.5″

DMG32240C028_03WTR

DWIN 2.8″ Smart TFT LCD Display (Resistive Touch)

  • Screen2.8″
  • Resolution240 × 320
  • PanelTN
  • TouchResistive
  • Brightness250 nit
  • ControllerT5L ASIC
  • Compact 2.8-inch colour TFT display controlled over a serial (UART) port from any microcontroller
  • 16 MB flash for fonts, images and UI files
  • Design the screens visually with DWIN DGUS tools – no coding needed for the interface
  • Load projects from an SD card or over the serial port
  • Single 5 V supply; backlight life over 20,000 hours
Get a quote Request datasheet
View this model on dwin-global.com

Specifications

Display
Screen size 2.8 inch
Resolution 240 × 320 pixels
Colours 262K (18-bit)
Panel type TN, TFT LCD
Active area 58.30 mm (W) × 44.20 mm (H)
Brightness 250 nit
Viewing angle (L / R / U / D) 70° / 70° / 50° / 70°
Backlight life > 20,000 hours (LED)
Touch panel
Touch type Resistive
Construction ITO film + glass, light transmittance 78 % ± 3 %
Controller and memory
Controller DWIN T5L ASIC
Flash memory 16 MB NOR flash (over 100,000 rewrite cycles)
SD card Supported (FAT32), 4 Mb/s download
Buzzer 3 V passive buzzer
Interface
Connector 10-pin, 1.0 mm latching socket
Serial interface UART2 / UART4, TTL/CMOS
Baud rate 3,150 – 3,225,600 bps (typical 115,200 bps)
Electrical
Operating voltage 4.5 – 5.5 V (typical 5 V)
Operating current 130 mA max
Power consumption < 5 W
Recommended supply 5 V, 1 A DC
Environment
Operating temperature −20 °C to 70 °C
Storage temperature −30 °C to 80 °C
Humidity 10 – 90 % RH
Development
Software / system DGUS II / TA (instruction set)

Specifications are from the DWIN datasheet and may change. Please confirm with us before ordering.

Similar models

Ready to bring your electronic hardware or display idea to life?

Connect directly with our hardware, firmware, and DWIN display engineers in Ahmedabad for technical consultation and transparent pricing.

Get a Quote