Get a quote

DMG48320C035_03WTR 3.5″ Smart HMI

DMG48320C035_03WTR
Compact 2.8″ / 3.5″

DMG48320C035_03WTR

DWIN 3.5″ Smart LCM TFT LCD Display (Resistive Touch)

  • Screen3.5″
  • Resolution320 × 480
  • PanelIPS
  • TouchResistive
  • Brightness250 nit
  • ControllerT5L ASIC, dual 8051 cores (separate GUI and application cores)
  • 320 × 480 IPS panel with 85° viewing angles on all sides
  • 16.7 million colours (24-bit)
  • Serial (UART) control from any microcontroller over TTL/CMOS
  • T5L ASIC with separate GUI and application cores; 16 MB flash
  • Build the GUI in DGUS V7.6 – no coding needed
Get a quote Request datasheet
View this model on dwin-global.com

Specifications

Display
Screen size 3.5 inch
Resolution 320 × 480 pixels
Colours 16.7M (24-bit)
Panel type IPS, TFT LCD
Active area 49.0 mm (W) × 73.4 mm (H)
Brightness 250 nit
Viewing angle (L / R / U / D) 85° / 85° / 85° / 85°
Backlight life > 20,000 hours (LED)
Touch panel
Touch type Resistive
Construction ITO film + ITO glass, light transmittance 78 % ± 3 %
Controller and memory
Controller DWIN T5L ASIC, dual 8051 cores (separate GUI and application cores)
Flash memory 16 MB NOR flash
SD card Supported, for loading projects
Interface
Connector 10-pin, 1.0 mm socket
Serial interface UART2 (TTL/CMOS); UART4 optional
Baud rate 3,150 – 3,225,600 bps (typical 115,200 bps)
Electrical
Operating voltage 4.5 – 5.5 V (typical 5 V)
Operating current 180 mA max (backlight at full brightness); 80 mA with backlight off
Power consumption < 5 W
Environment
Operating temperature −20 °C to 70 °C
Storage temperature −30 °C to 80 °C
Development
Software / system DGUS V7.6 (no coding needed); DGUS II and TA (instruction set)

Specifications are from the DWIN datasheet and may change. Please confirm with us before ordering.

Similar models

Ready to bring your electronic hardware or display idea to life?

Connect directly with our hardware, firmware, and DWIN display engineers in Ahmedabad for technical consultation and transparent pricing.

Get a Quote